Just like other appliances or electrical equipment in your home, massage chairs need maintenance too. Doing so allows you to use it in its optimal condition for an extended time. In the same way, not performing maintenance can cause issues and irreparable damages to the machine.
Introduction
How can you ensure that your massage chair is always working at its best?
Maintenance can be a chore, but it’s necessary for massage chairs. While it takes time and effort compared to not doing anything, it’s worth it in the end. After all, massage chairs can be pretty costly. Taking no notice of its condition makes it vulnerable to damage.
Therefore, you’ll have to spend more money on repairs. In the worst-case scenario, the machine might break, wasting your investment.
Store massage chair in a suitable location
Where you place your massage chair matters to its condition more than you might think. The first consideration is your safety and that of the machine. For instance, you shouldn’t store your massage chair in a location where it can get wet. Therefore, outdoor areas near the window, kitchen, or bathroom are out of the question. Not only can that damage the machine, but it can also lead to electrocution.
Other factors include the level of humidity and sunlight. If the area has high humid levels or is always damp, there’s a risk of mold growth. Meanwhile, the fabric or upholstery can get damaged if it’s in direct contact with sunlight. While mold and fabric issues aren’t dangerous, they can affect the massage chair’s appearance.
However, in extreme cases, they can be uncomfortable and affect your massage experience.
Perform regular and deep cleaning
Cleaning your massage chair isn’t only to keep it looking good and new. Built-up dirt and bacteria can cause skin irritation and foul odor, affecting your relaxation. The only way to avoid that is to clean its upholstery regularly, typically before and after using the machine.
Every month or two, perform a deep cleaning to remove bacteria on the massage chair’s hard-to-reach areas.
Wiping the surface with a dry or damp cloth is enough for regular cleanups. Meanwhile, for deep cleaning and removing stains, use mild soap solutions. Also, keep in mind that getting your massage chair wet can lead to safety hazards and potential damage.
Therefore, before applying water, make sure that the machine is unplugged. Remove the detachable components as well to make it easier for you to clean.
Check the massage chair’s condition frequently
Don’t wait for your massage chair to break before you get it repaired. By that time, the damages may already be irreversible. To avoid that, perform regular troubleshooting. Don’t ignore the slightest hint of something wrong with the machine. It’s better to be sure the massage chair is working well than to keep using it and worsen the issues.
Consult an expert for massage chair repairs
If you’re dealing with minor issues that can be solved by restarting the machine, you can do it at home.
However, avoid doing so if the problem needs dissembling the parts to access the internal components.
Instead, contact the manufacturer or retailer for an authorized technician to work on the machine. This way, you can avoid the risk of electrocution and potentially damaging the massage chair even further.
Follow the safety guidelines at all times
It goes without saying that there are practices you can and can’t do with your massage chair. You can maintain its optimal condition by not doing anything that can negatively affect it.
For example, avoid eating or drinking during massage chair sessions. You might spill the food or liquid on the machine. At the very least, you might stain the fabric, but at worst, the internal components will get wet and damaged.
Other safety guidelines include checking if the voltage corresponds with the massage chair specification. It would help if you also were careful with plugging it in and out to avoid electric shock and machine malfunction. It’s also essential that you operate the massage chair as it’s intended to be, according to the manufacturer’s manual. Other guidelines to follow are also written there for your reference.
2 Durable and Easy-to-Maintain Massage Chairs
No amount of hard work in maintaining your massage chair can save it if it’s not durable in the first place. It will still break in no time, wasting the money you invested in it. Therefore, you should go for a reliable model, although its initial cost may be higher. In the long run, you’ll be able to save money for repairs or replacements anyway.
Here are some massage chairs with the durability you can trust and are even easy to maintain.
Luraco i9 Medical Massage Chair
Original Price: $13,990
Discounted Price: $12,490
The Luraco i9 Medical Massage Chair promises you the durability expected from a USA-based brand. From the internal robots and components to the frame and upholstery, rest assured that this model has excellent resilience. It’s even made with full luxury-level and car-quality leather for the outer cover.
Therefore, you can trust that it won’t easily get scratched or damaged, as long as you take care of it properly.
Osaki OS Hiro LT 3D Massage Chair
Original Price: $6,827
Discounted Price: $5,699
Another massage chair you can rely on when it comes to durability is the Osaki OS Hiro LT 3D Massage Chair.
Unlike other models in the market, it has Japanese-designed brushless motors, which operate smoother and prolongs the machine’s usage. It doesn’t even excessively consume power as traditional engines do. The upholstery utilizes synthetic leather, which doesn’t get stained quickly and is simple to clean and maintain.
In Summary
If you want your massage chair to consistently perform at its best, get a durable model, first and foremost. Examples are the Luraco i9 Medical Massage Chair and Osaki OS Hiro LT 3D Massage Chair. Afterward, please place it in a safe area, keep it clean, perform regular troubleshooting, and don’t do anything that might damage it.
To place your order, visit Massage Chair Heaven or contact us at 1-833-627-7245 or via live chat.
